Raraunga Taketake
Momo Taketake:
1.Kaiwhakahaere ahua kotahi
2.Twin kāhua kaiwhakahaere
3.Karekau karekau o te mutunga o te taura
Nga ahuatanga
Tapeke whiti-wahanga: 0.25~150mm²
Waehere tae me te rahinga ngongo ki te DIN 46228, wahanga 4(0.5~50mm²)
Kore he haurua, ka taea e te mura ahi te whakaae
Te wera ki te 105℃(PP) 120℃ (PA)
Rauemi:
99% Parapara Parakore
Hangaia: Polypropylene(PP), Polyamide(PA)
Mata
I whakakikoruatia ki te tine hei tiaki i te waikura
Nga korero ota
Kei te waatea ano i roto i nga pouaka kirihou pai mo nga whakaritenga iti.I raro i nga ahuatanga noa kaore he whakaritenga MOQ mo te putea putea.
Raraunga Hangarau
Rauemi Whakatere (haunga te Awhe Hononga Tere)
| Te parahi | 99.9% parakore |
| Te Kaha Toka | 200MPa |
| Te Whakatauranga Ductile | 35% |
| State Metal Whakamutunga | Ko tetahi waahanga o te hua kua rerihia |
| Ihirangi hāora | 50ppm te teitei |
|
|
|
| Parahi | 30% Zinc 70% Copper |
| Te Kaha Toka | 580 Mpa |
| Te Whakatauranga Ductile | 6% min |
| State Metal Whakamutunga | Ko tetahi waahanga o te hua kua rerihia |
|
|
|
| Rauemi | Tini |
| Ihirangi Tin | 99.90% |
| Ko etahi atu konganuku | Lead + Antimony |
| Te Matotoru Whakakikorua | 1.5 microns |
|
|
|
| Kawenga Whanui | 98.5% IACS |
| Te Whakaaetanga Tapeke | 1.738 moroiti-ohm cm |
|
|
|
| Rauemi | PVC mo te katoa haunga te nylon 6, nylon 66 ranei – mo te IQC |
| Ngaohiko pakaru | 1.5 k V(min) |
| Te parenga whakaahuru | Neke atu i te 100 meg ohms |
| Ngaohiko mahi | Tae atu ki te 300V AC/DC |
|
|
|
| Tuhinga o mua | -40 ℃ ki te +150 ℃ |
| Parahi | 145℃ |
| tine whakakikoruatia | 160℃ |
WHAKAMAHI
| Wāhanga whiti (mm²) | Nama take. | Ahu(mm) | AWG |
| Wāhanga whiti (mm²) | Nama take. | Ahu(mm) | AWG | ||||||
| L | W | D | C |
| L | W | D | C | ||||||
| 0.25 | EN0206 | 6 | 1.5 | 1.1 | 0.8 | #26 |
| 10 | EN10-18 | 18 | 5.8 | 4.9 | 4.5 | #8 |
| EN0208 | 8 |
| EN10-20 | 20 | ||||||||||
| 0.34 | EN0306 | 6 | #24 |
| EN10-25 | 25 | ||||||||
| EN0308 | 8 |
| 16 | EN16-12 | 12 | 7.2 | 6.2 | 5.8 | #6 | |||||
| 0.5 | EN0506 | 6 | 1.7 | 1.3 | `1.0 | #22 |
| EN16-16 | 16 | |||||
| EN0508 | 8 |
| EN16-18 | 18 | ||||||||||
| EN0510 | 10 |
| EN16-20 | 20 | ||||||||||
| EN0512 | 12 |
| EN16-22 | 22 | ||||||||||
| 0.75 | EN7506 | 6 | 1.9 | 1.5 | 1.2 | #20 |
| EN16-25 | 25 | |||||
| EN7508 | 8 |
| 25 | EN25-12 | 12 | 9.1 | 7.9 | 7.5 | #4 | |||||
| EN7510 | 10 |
| EN25-16 | 16 | ||||||||||
| EN7512 | 12 |
| EN25-18 | 18 | ||||||||||
| 1.0 | EN1006 | 6 | 2.2 | 1.7 | 1.4 | #18 |
| EN25-22 | 22 | |||||
| EN1008 | 8 |
| EN25-25 | 25 | ||||||||||
| EN1010 | 10 |
| 35 | EN35-16 | 16 | 10.2 | 8.7 | 8.3 | #2 | |||||
| EN1012 | 12 |
| EN35-20 | 20 | ||||||||||
| EN1018 | 18 |
| EN35-25 | 25 | ||||||||||
| 1.5 | EN1508 | 8 | 2.5 | 2.0 | 1.7 | #16 |
| 50 | EN50-12 | 12 | 12.7 | 10.9 | 10.3 | #1 |
| EN1510 | 10 |
| EN50-18 | 18 | ||||||||||
| EN1512 | 12 |
| EN50-22 | 22 | ||||||||||
| EN1518 | 18 |
| EN50-25 | 25 | ||||||||||
| 2.5 | EN2506 | 6 | 3.3 | 2.6 | 2.3 | #14 |
| 70 | EN70-22 | 22 | 15.8 | 14.3 | 13.5 | 2/0 |
| EN2508 | 8 |
| EN70-25 | 25 | ||||||||||
| EN2510 | 10 |
| EN70-32 | 32 | ||||||||||
| EN2512 | 12 |
| 95 | EN95-25 | 25 | 17.3 | 15.6 | 14.8 | 3/0 | |||||
| EN2518 | 18 |
| EN95-30 | 30 | ||||||||||
| 4 | EN4009 | 9 | 3.9 | 3.2 | 2.8 | #12 |
| EN95-34 | 34 | |||||
| EN4012 | 12 |
| 120 | EN120-30 | 30 | 20.2 | 17.7 | 16.7 | 4/0 | |||||
| EN4018 | 18 |
| EN120-34 | 34 | ||||||||||
| 6 | EN6010 | 10 | 4.7 | 3.9 | 3.5 | #10 |
| EN120-38 | 38 | |||||
| EN6012 | 12 |
| 150 | EN150-32 | 32 | 23 | 20.6 | 19.6 | 250/300 | |||||
| EN6018 | 18 |
| EN150-40 | 40 | ||||||||||
| 10 | EN10-12 | 12 | 5.8 | 4.9 | 4.5 | #8 |
| 185 | EN185-32 | 32 | 23.9 | 21.4 | 20.2 | 300/350 |
| EN10-16 | 16 |
| EN185-40 | 40 | ||||||||||
